Install Stratify OS

Get Some Hardware

To install a pre-compiled binary, you will need one of the following development boards. Follow the link on your board to install Stratify OS.

• Nucleo-F446ZE
• STM32H750B-DK

Explore

Once the OS is installed, here are a few sl commands you can use to explore the OS.

# Show OS detailssl os.ping
# reset the boardsl os.reset
# Explore the filesystemsl fs.list:path=device@/# show flash pages for applicationssl fs.list:path=device@/app/flash,hide=false# show RAM available to applicationssl fs.list:path=device@/app/ram,hide=false# List the available device driverssl fs.list:path=device@/dev# copy a file to the MCU flash memoryecho "Hello World" > hello.txtsl fs.copy:source=[email protected],dest=device@/app/flash/hello.txtsl fs.read:path=device@/app/flash/hello.txt# for devices with an SD Card# the SD card needs to be formatted for this to worksl fs.copy:source=[email protected],dest=device@/home/hello.txtsl fs.list:path=device@/home
# taskssl task.listsl task.analyze:duration=3
# read the debug tracing buffersl debug.analyze 

Run Applications

Now that you have the OS installed and have run some basic commands, you are ready to run some applications.