To install Stratify OS, you need to install the bootloader and the OS. The bootloader is installed using the
mbed mounted drive. The OS is then installed using the native USB. You need to connect BOTH USB connectors.
export CHIP=F446ZEexport ID=FFxXbp1ExySM7DaLrBA4
mkdir tmpsl cloud.install:id=$ID,build=boot_release,dest=[email protected]
tmp/Nucleo-F446ZE_build_boot_release.bin to the
mbed drive. Then push the button on the board to reset the device. You should see the blue light flash several times. You can do this using the command line. This command will vary slightly depending on your system. You can always just drag-and-drop to copy as well.
cp ./tmp/Nucleo-$CHIP_build_boot_release.bin /Volumes/NODE_$CHIP
Now install the OS. Remember BOTH USB connectors need to be connected.
Use these variables with the above instructions:
export CHIP=F746ZGexport ID=XCw1jMjiObLMUDKZFRG2
export CHIP=F767ZIexport ID=8fgoFM3GV4Kos65AegZT
Once the OS install is complete, you can explore Stratify OS using sl.